Christmas Tag Instructions

Do not color sort.. 
You will need:
Fabric for applique
Thread
Fabri Solvy by Sulky or other heavy duty WSS.
Iron
Ribbon

Christmas Tag One
  1.  Hoop your stabilizer. We recommend Fabri Solvy by Sulky.
  2.  Sew out your first color. 
  3.  Postion presprayed with adhesive fabric over the first pass.
  4   Sew out the second color.
  5.  Sew out the third color.
  6.  Gently remove hoop but DO NOT unhoop design.
  7.  Trim with sharp scissors up to the stitching. Do not cut through the stitches.
  8.  Replace hoop. Be sure not to bump hoop. Make sure it is securely in place.
  9.  Sew out colors 4-9
10.  Sew out color 10 which will be the satin outline around the tag.
11.  Sew out the final color. 
12.  Remove from hoop.
13.  Gently cut excess solvy away.
14.  Run completed tag under warm water until about 75% of solvy is removed..
15.  Take a warm wet sponge and go around edges to smooth out.
16.  Lay between two paper towels to dry.
17.  When nearly dry place the tag between two pieces of ironing cloth (old pillowcase) and iron till smooth and stiff.
18.  Add color full ribbon to tie..
IF YOU ARE ADDING TEXT TO THE DESIGN BE SURE TO SEW THIS OUT BEFORE YOU REMOVE THE TAG FROM THE HOOP.........


Christmas Tag Two
  1.  Hoop your stabilizer. We recommend Fabri Solvy by Sulky.
  2.  Sew out your first color. 
  3.  Postion presprayed with adhesive fabric over the first pass.
  4   Sew out the second color.
  5.  Sew out the third color.
  6.  Gently remove hoop but DO NOT unhoop design.
  7.  Trim with sharp scissors up to the stitching. Do not cut through the stitches.
  8.  Replace hoop. Be sure not to bump hoop. Make sure it is securely in place.
  9.  Sew out colors 4-7
10.  Sew out color 8 which will be the satin outline around the tag.
11.  Sew out the final color. 
12.  Remove from hoop.
13.  Gently cut excess solvy away.
14.  Run completed tag under warm water until about 75% of solvy is removed..
15.  Take a warm wet sponge and go around edges to smooth out.
16.  Lay between two paper towels to dry.
17.  When nearly dry place the tag between two pieces of ironing cloth (old pillowcase) and iron till smooth and stiff.
18.  Add color full ribbon to tie..
IF YOU ARE ADDING TEXT TO THE DESIGN BE SURE TO SEW THIS OUT BEFORE YOU REMOVE THE TAG FROM THE HOOP.........


Christmas Tag Three
  1.  Hoop your stabilizer. We recommend Fabri Solvy by Sulky.
  2.  Sew out your first color. 
  3.  Postion presprayed with adhesive fabric over the first pass.
  4   Sew out the second color.
  5.  Sew out the third color.
  6.  Sew out fourth color.
  7.  Gently remove hoop but DO NOT unhoop design.
  8.  Trim with sharp scissors up to the stitching. Do not cut through the stitches.
  9.  Replace hoop. Be sure not to bump hoop. Make sure it is securely in place.
10.  Sew out color 5 which will be the satin outline around the tag.
11.  Remove from hoop.
12.  Gently cut excess solvy away.
13.  Run completed tag under warm water until about 75% of solvy is removed..
14.  Take a warm wet sponge and go around edges to smooth out.
15.  Lay between two paper towels to dry.
16.  When nearly dry place the tag between two pieces of ironing cloth (old pillowcase) and iron till smooth and stiff.
17.  Add color full ribbon to tie..
IF YOU ARE ADDING TEXT TO THE DESIGN BE SURE TO SEW THIS OUT BEFORE YOU REMOVE THE TAG FROM THE HOOP.........


Christmas Tag Four
  1.  Hoop your stabilizer. We recommend Fabri Solvy by Sulky.
  2.  Sew out your first color. 
  3.  Postion presprayed with adhesive fabric over the first pass.
  4   Sew out the second color.
  5.  Gently remove hoop but DO NOT unhoop design.
  6.  Trim with sharp scissors up to the stitching. Do not cut through the stitches.
  7.  Replace hoop. Be sure not to bump hoop. Make sure it is securely in place.
  8.  Sew out colors 3-9
  9.  Sew out color 12 which will be the satin outline around the tag.
10.  Sew out the final color. 
11.  Remove from hoop.
12.  Gently cut excess solvy away.
13.  Run completed tag under warm water until about 75% of solvy is removed..
14.  Take a warm wet sponge and go around edges to smooth out.
15.  Lay between two paper towels to dry.
16.  When nearly dry place the tag between two pieces of ironing cloth (old pillowcase) and iron till smooth and stiff.
17.  Add color full ribbon to tie..
IF YOU ARE ADDING TEXT TO THE DESIGN BE SURE TO SEW THIS OUT BEFORE YOU REMOVE THE TAG FROM THE HOOP.........


Christmas Tag Five
  1.  Hoop your stabilizer. We recommend Fabri Solvy by Sulky.
  2.  Sew out your first color. 
  3.  Postion presprayed with adhesive fabric over the first pass.
  4   Sew out the second color.
  5.  Gently remove hoop but DO NOT unhoop design.
  6.  Trim with sharp scissors up to the stitching. Do not cut through the stitches.
  7.  Replace hoop. Be sure not to bump hoop. Make sure it is securely in place.
  8.  Sew out colors 3-7
  9.  Sew out color 8 which will be the satin outline around the tag.
10.  Sew out the final two colors. 
11.  Remove from hoop.
12.  Gently cut excess solvy away.
13.  Run completed tag under warm water until about 75% of solvy is removed..
14.  Take a warm wet sponge and go around edges to smooth out.
15.  Lay between two paper towels to dry.
16.  When nearly dry place the tag between two pieces of ironing cloth (old pillowcase) and iron till smooth and stiff.
17.  Add color full ribbon to tie..
IF YOU ARE ADDING TEXT TO THE DESIGN BE SURE TO SEW THIS OUT BEFORE YOU REMOVE THE TAG FROM THE HOOP.........

Christmas Tag Six
  1.  Hoop your stabilizer. We recommend Fabri Solvy by Sulky.
  2.  Sew out your first color. 
  3.  Postion presprayed with adhesive fabric over the first pass.
  4   Sew out the second color.
  5.  Gently remove hoop but DO NOT unhoop design.
  6.  Trim with sharp scissors up to the stitching. Do not cut through the stitches.
  7.  Replace hoop. Be sure not to bump hoop. Make sure it is securely in place.
  8.  Sew out colors 3
  9.  Sew out color 4 which will be the satin outline around the tag.
10.  Sew out the final color. 
11.  Remove from hoop.
12.  Gently cut excess solvy away.
13.  Run completed tag under warm water until about 75% of solvy is removed..
14.  Take a warm wet sponge and go around edges to smooth out.
15.  Lay between two paper towels to dry.
16.  When nearly dry place the tag between two pieces of ironing cloth (old pillowcase) and iron till smooth and stiff.
17.  Add color full ribbon to tie..
IF YOU ARE ADDING TEXT TO THE DESIGN BE SURE TO SEW THIS OUT BEFORE YOU REMOVE THE TAG FROM THE HOOP.........

Christmas Tag Seven
  1.  Hoop your stabilizer. We recommend Fabri Solvy by Sulky.
  2.  Sew out your first color. 
  3.  Postion presprayed with adhesive fabric over the first pass.
  4   Sew out the second color.
  5.  Sew out the third color.
  6.  Gently remove hoop but DO NOT unhoop design.
  7.  Trim with sharp scissors up to the stitching. Do not cut through the stitches.
  8.  Replace hoop. Be sure not to bump hoop. Make sure it is securely in place.
  9.  Sew out colors 4-8
10.  Sew out color 9 which will be the satin outline around the tag.
11.  Sew out the final color. 
12.  Remove from hoop.
13.  Gently cut excess solvy away.
14.  Run completed tag under warm water until about 75% of solvy is removed..
15.  Take a warm wet sponge and go around edges to smooth out.
16.  Lay between two paper towels to dry.
17.  When nearly dry place the tag between two pieces of ironing cloth (old pillowcase) and iron till smooth and stiff.
18.  Add color full ribbon to tie..
IF YOU ARE ADDING TEXT TO THE DESIGN BE SURE TO SEW THIS OUT BEFORE YOU REMOVE THE TAG FROM THE HOOP.........